Easily install and remove your boat lift this year!
Preserve your relationships! No more pressuring your friends or family to help you launch your boat lift at the beginning and end of every boating season.
Float your boat lift for easy installation.
The Boat Lift Helper is made of the same tough material that the military uses to raise sunken equipment from the ocean floor. The Heavy-duty air-lift-bags will raise your boat lift up off the lake bottom for simple positioning right from your dock. No need to muscle your boat lift through muddy, sandy, rocky, or weedy lake bottoms.
Mid-season when lake water levels change, simply re-inflate the Boat Lift Helper’s powerful air-lift-bags to move your boat lift into a new position. No hassles or need to re-attach wheels and no special air compressors are required.
Enjoy boating with your friends and family without the added chore of boat lift installation and removal!
What are the specifics?
By hand, fasten the universal brackets that are fitted into the Boat Lift Helper’s air-lift-bags to your boat lift bottom beams. Our brackets fit almost all manufacturers’ boat lifts; we can provide specialty bracket adapters for unusual fits. Follow the simple, easy step-by-step installation guide. The only tools needed are a:
knife to cut the air hose
screw driver to tighten the hose clamps.
- Pliers to tighten the wing nuts
That’s it; you’re ready to go boating
No expensive air compressor is needed to inflate the airbags. The Boat Lift Helper only requires less than 3 P.S.I. of air pressure (2.5 P.S.I. is required for proper boat lift flotation) which is easily achieved with the same low priced pumps you probably already use to inflate floats, tubes and other lake toys. You can also use an air compressor to inflate the airbagsThere is no worry if your pump puts out more than 3 P.S.I. the Boat Lift Helper has a built in relief valve to release the extra pressure.
You may think that huge bags would be required to hoist your big boat lift off the lake bottom, but that’s why we figured it out for you. This is the same material that the military uses to raise sunken heavy equipment from ocean bottoms and the Boat Lift Helper’s air-lift-bags can raise your boat lift weighing up to 800 pounds. Optional air-lift-bags are available if your lift weighs more than 800 pounds.
Two Optional Purchases -
- Brass Quick Attach Couplers $39.95 – Make removal for winter stage even easier with these barbed hose couplers. Simply unscrew the fittings to detach the hose from the bags.
- 120v AirHead 3PSI Pump $79.95 – use for inflation
Once you have attached the Boat Lift Helper to your lift, simply move your boat lift into the water and inflate the air-lift-bags. When inflated a cushion of air will allow you and a friend to glide your boat lift with one hand! When your lift is where you want it, release the air from the bags. You are done! That’s all there is to it!
Leave the Boat Lift Helper attached to your boat lift in case water levels change during the season. Simply refill the air-lift-bags and glide your boat lift into a new position. Use the Boat Lift Helper again at the end of the season to easily remove your lift from the water.